What you can do with the Wi-Fi
Operating the camera by connecting it to a smartphone
• Operating the shutter button of the camera using a smartphone (remote recording)
(→72)
• Playing back or saving images stored on the camera, or uploading them on social
media sites (→73)
• Combining motion pictures recorded with Snap Movie according to your preference on
a smartphone
Expanding the scope of applications by connecting the camera to a smartphone
compatible with Bluetooth Low Energy
• Pairing (connection setup) (→68)
• Turning on/off the camera with a smartphone (→71)
• [B] (Bulb) recording
• Transferring recorded images to a smartphone automatically
• Writing location information of a smartphone on a recorded image (→73)
• Synchronising the camera's clock with a smartphone
●
This manual uses the term "smartphone" for both smartphones and tablets unless it is necessary to
distinguish between them.
●
For details, refer to "Operating Instructions for advanced features (PDF format)".
■
Lighting of the WIRELESS connection lamp (Blue)
■
[Wi-Fi] button
In this Operating Instructions, a function button to which [Wi-Fi] is assigned is referred to
as the [Wi-Fi] button. (At the time of purchase, [Wi-Fi] is assigned to [Fn9] in recording
mode, and [Fn5] in playback mode.)
• For details on the function button, refer to (→27)
To start up the Wi-Fi function
(When in recording mode):
Touch [
]
Touch [
]
●
The camera cannot be used to connect to a public wireless LAN connection.
Lit: When the Wi-Fi/Bluetooth function is ON or connected
Blinking: When sending picture data by operating the camera
• In [Wireless Connection Lamp] in the [Setup] menu, you can set the lamp so
that it will not light/flash.
/Bluetooth
®
DVQX1795 (ENG)
Wi-Fi/Bluetooth
function
®
67