Honeywell AlarmNet 360 Online Help Manual page 52

4.
5.
6.
7. If this issue has not been cleared, Contact AlarmNet Technical Support.
VISTA commercial
arming command When sending an arm text message command to a commercial panel with zero exit delay and a
bypassed zone, the text message reply may not display that a zone is bypassed.
fire zone
If a fire zone is in a trouble condition (with all partitions disarmed), and you attempt to send a
text message command to globally Arm Away, the reply message will indicate that all partitions
are Armed Away, but may not indicate a fire trouble.
output relay
Even if a programmed output relay is restricted from being accessed in the control panel, its
operation will function when commanded by an SMS text message.
sluggish response For security systems that are heavily populated with a large number of zones and wireless
devices, etc., the Remote Access response may be sluggish.
VISTA residential
restart exit delay If the Restart Exit Delay field (91) is enabled, sending text message commands to a
residential control panel (e.g., Vist-10P, Vista-15P), may put the panel in an exit delay
countdown condition before a successful completion of the command is sent.
AlarmNet360 Online Help Guide
and "Email Notifications" are set to Total Connect 2.0 (Enhanced Rpts) and MultiMode
Address is either 25 for Vista 10/15/20 or matches the panel for Vista Turbo.
• For LYNX series controls, verify the "Remote Access" is Enabled and "Email
Notifications" are set to Total Connect 2.0 (Enhanced Rpts) in AlarmNet 360.
After verifying the AlarmNet 360 device programming, ensure that the data is in the device
by performing a "Send Data" command from the "Show Programmed Devices" page of
AlarmNet 360.
Verify the "Transferred Date(ET)" shows a recent date and time and the arrow indicates
down.
If you still have the Error 1000 ensure the control panel and AlarmNet device revision
levels are support Total Connect 2.0. (Refer to the "
Devices
" topic in this help guide.)
– 49 –
Contents
Total Connect 2.0 Compatible
Tasks