Table of Contents
Advertisement
5
Attach the cover.
Notes
• Set both speakers to the same height.
• You can install the front and surround speakers on
optional speaker stands (WS-FV20 or WS-FV11).
When detaching the speakers
from their stands
Insert a flathead screwdriver (not supplied) into
the notch of the cover, and remove the cover
from the stand.
Flathead screwdriver
(not supplied)
Note
Detach the speaker carefully to prevent pinching your
fingers between the speaker and speaker stand.
GB
38
Attaching the supplied foot
pads
When you place the center speaker on a rack,
attach the supplied foot pads to the bottom face
of the speaker. Make sure that the hole on the
back of the speaker is in the right direction, as
illustrated below.
Center speaker
Hole on the back of the speaker
Foot pad
Tip
When placing the front speakers or the surround
speakers vertically, also attach the supplied foot pads
to the bottom face of each speaker.
Hide quick links:
Advertisement
Table of Contents
