Step 5: Performing The Quick Setup - Sony DAV-HDX277WC Operating Instructions Manual

Step 5: Performing the
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Note
• When you connect the system and the TV with the
component video cord (not supplied) or HDMI cable
(not supplied), you need to set the type of video
output for matching your TV. For details, see "Setting
the type of video output to match your TV" (page 46).
C/X/x/c,
1
Turn on the TV.
2
(DAV-HDX277WC)
Press [/1 on the unit.
(DAV-HDX279W/DAV-HDX576WF)
Press [/1 on the unit, and POWER on
the surround amplifier.
Note
• Make sure that the function is set to "DVD"
(page 47).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ ] to run QUICK SETUP.]
ENTER
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 45) and perform
again.
4
Press without inserting a disc.
44
US
The Setup Display for selecting the
language used in the on-screen display
appears.
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
"/1
6
Press
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
DISPLAY
7
Press X/x to select the setting that
matches your TV type.
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 69)
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 69)
8
Press
The Setup Display for selecting the speaker
formation appears.
9
Press C/c to select the speaker
formation image as the speakers are
actually positioned.
For details, see "Getting Optimal Surround
Sound for a Room" (page 89).
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
PORTUGUESE
.
VIDEO SETUP
TV TYPE:
PROGRESSIVE
(COMPONENT OUT)
4:3 OUTPUT: 4:3 LETTER BOX
BLACK LEVEL: 4:3 PAN SCAN
BLACK LEVEL
(COMPONENT OUT)
PAUSE MODE:
.
ENGLISH
ENGLISH
FRENCH
SPANISH
16:9
: 16:9
: OFF
AUTO