Sony DAV-DZ810W Operating Instructions Manual page 84

Note
• When you select an item, the sound cuts off for a
moment.
• When you change the [SIZE] setting, the
[STANDARD (WIRED)] or [STANDARD
(WIRELESS)] of [SPEAKER FORMATION]
setting remains the same, but the other settings of
[SPEAKER FORMATION] return to [STANDARD
(WIRELESS)].
x [DISTANCE (FRONT)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 20), the settings is automatically
displayed.
0.0 - 7.0 m
0 - 23 ft
Be sure to change the value in the Setup Display
when you move the speakers.
[L/R]
1)
3.0 m/10 ft
[CENTER]
1)
3.0 m/10 ft
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
[SUBWOOFER]
1)
3.0 m/10 ft
1)
When you perform the Quick Setup (page 20), the
default settings are changed.
2)
0.0 to 6.9 meters for North American models.
84
GB
2)
/
Front speaker distance from the
listening position can be set in
0.2 meter (1 ft) increments from
2)
0.0 to 7.0 meters (0 to 23 ft).
Center speaker distance from the
listening position can be set in
0.2 meter (1 ft) increments from
2)
0.0 to 7.0 meters (0 to 23 ft).
Subwoofer distance from the
listening position can be set in
0.2 meter (1 ft) increments from
2)
0.0 to 7.0 meters (0 to 23 ft).
x [DISTANCE (SURROUND)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 20), the settings is automatically
displayed.
Be sure to change the value in the Setup Display
when you move the speakers.
[L/R] Surround speaker distance from
*
3.0 m/10 ft
the listening position can be set in
(appears when you
0.2 meter (1 ft) increments from
set [SURROUND]
0.0 to 7.0 meters** (0 to 23 ft).
to [YES] in the
[SIZE] setting.)
* When you perform the Quick Setup (page 20), the
default settings are changed.
** 0.0 to 6.9 meters for North American models.
Note
• When you set the distance, the sound cuts off for a
moment.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in the
recommended range,
being the number).
recommended distance.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R] Set this between –15.0 dB and
0.0 dB
+10.0 dB in 1.0 dB increments.
/ ** m is displayed (**
indicates over the
indicates below.