Settings For The Speakers; [Speaker Setup] - Sony DAV-DZ810W Operating Instructions Manual

x [DivX]
Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.

Settings for the Speakers

[SPEAKER SETUP]

To obtain the best possible surround sound, set
for the size of the speakers you have connected
and their distance from your listening position.
Then use the test tone to adjust the level and the
balance of the speakers to the same level.
Select [SPEAKER SETUP] in the Setup
Display. For details, see "Using the Setup
Display" (page 78).
The default settings are underlined.
Note
• You cannot operate these setup items when you
connect headphones to the system.
SPEAKER SETUP
SIZE:
DISTANCE(FRONT):
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE:
FRONT:
CENTER:
SURROUND:
SUBWOOFER:
To return to the default setting
when changing a setting
Select the item, then press CLEAR. Note that
only the [SIZE] setting does not return to the
default setting.
x [SIZE]
If you do not connect center or surround
speakers, or move the surround speakers, set the
parameters for [CENTER] and [SURROUND].
Since the front speaker and subwoofer setting is
fixed, you cannot change them.
[FRONT] [YES]
[CENTER] [YES]: Normally select this.
[NONE]: Select this if no center
speaker is used.
[SURROUND] [YES]: Normally select this.
[NONE]: Select this if no
surround speaker is used.
[SUBWOOFER] [YES]
OFF
YES
YES
YES
YES
continued
83
GB