Sony DAV-DZ810W Operating Instructions Manual page 22

Measurement complete.
FRONT L :
FRONT R :
CENTER :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
YES.
YES
Note
• Reflections from walls or the floor may affect
measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
To quit the Quick Setup
Press DISPLAY in any Step.
Tip
• If you change the position of the speakers, reset the
speaker settings. See "Getting Optimal Surround
Sound for a Room" (page 74) and "Calibrating the
Appropriate Settings Automatically" (page 76).
• If you want to change any of the settings, see "Using
the Setup Display" (page 78).
To recall the Quick Setup display
1
Press DISPLAY when the system is in
stop mode.
The Control Menu appears.
2
Press X/x to select
press .
The options for [SETUP] appear.
1 2 ( 2 7 )
1 8 ( 3 4 )
: :
QUICK
QUICK
CUSTOM
RESET
BNR
3
Press X/x to select [QUICK], then press
The Quick Setup display appears.
22
GB
5.0m 0.0dB
5.0m 0.0dB
5.0m + 1.0dB
5.0m + 4.0dB
3.0m - 2.0dB
3.0m - 2.0dB
NO
[SETUP], then
DVD VIDEO
To adjust the IR transmitter and
IR receiver of the surround
speaker (L)
After connecting the speakers, surround
amplifier, IR transmitter, and the
AC power cords (mains leads), adjust the
wireless system for good transmission.
"/1
POWER/
ON LINE indicator
1
Press "/1 on the system and POWER on
the surround amplifier.
The system and surround amplifier turn on
and the POWER/ON LINE indicator turns
red.
2
Orient the IR transmitter and IR receiver of
the surround speaker (L) to face each other.
Adjust the position until the POWER/ON
LINE indicator turns green.
Tip
• The IR transmitter is movable for easy reorientation.
Note
• Make sure that there is no obstruction such as a
person or object between the IR transmitter and the IR
receiver of the surround speaker (L). Otherwise, the
sound from the surround speakers may be interrupted.
• If the POWER/ON LINE indicator turns red,
transmission is not occuring. Adjust the position of
the IR transmitter and surround speaker (L) until the
.
POWER/ON LINE indicator turns green.
• If the POWER/ON LINE indicator flashes red, the IR
receiver is receiving an infrared ray from another
Sony's wireless product. Move the IR transmitter
and/or the surround speaker (L) so that the POWER/
ON LINE indicator turns green.
POWER
POWER