Parts And Controls - Bushnell Core Instruction Manual

Core Trail Cameras, and includes many new or improved features, including:
• Dual Sensor (119975C/119977C only) – the camera has dual sensors in order to capture the best
quality images for both day and night.
• Auto PIR Sensitivity - the camera monitors ambient temperature conditions and automatically adjusts
the sensor/trigger signal to be more sensitive to slight variations in temperature on hot days, less
sensitive on cold days.
• Removable Battery Tray – replaceable battery tray in order to easily exchange your batteries quickly.
Built in latch in order to catch the tray from falling out of the camera.
• GPS Geotag Capability - allows the user to input the longitude and latitude of the camera's position,
which will be embedded in each photo file. This enables Google Earth, Picassa and other geotag enabled
software to automatically show a map pinpointing each camera's location when a group of photos are
reviewed on a computer. Especially useful for those who setup multiple Core Trail Camera s to monitor
large or widely separated areas.
• Multi Flash Mode (LED Control) - prevents overexposed flash photos at close range.
• Hybrid Capture Mode - allows both still photos and videos to be captured at each trigger, up to
highest resolution settings for each.
• NV Shutter - user can select shutter speed for images captured at night allowing control over
brightness vs. ability to stop motion.
• Camera Operating Mode can be limited to Day only, Night only, or 24 HRs
• Preset Modes for Feeder, Trail and Food Plot applications.
• Dynamic Video mode uses the duration of animal activity to determine the length of the captured file,
so your video doesn't stop right as things get interesting.
And many more features such as video with audio, 0.2 second trigger speed and 0.6 second recover time
(still photos), widescreen or fullscreen format still photos, imprintable camera name (user set) along
with current data including temperature and moon phase.
Applications
The Core Trail Camera can be used as a trail camera for hunting or scouting game. It is also suitable for
surveillance usage.

PARTS AND CONTROLS

The Core Trail Camera provides the following connections for external devices: USB port, SD card slot
and external DC power in (pg 6, Fig. 1).
A 3-way power switch is used to select the main operating modes: OFF, SETUP, and ON (pg 6, Fig. 2).
A D-Pad interface with five keys is primarily used in SETUP mode to select operational functions and
parameters. As shown on the next page, these keys are: UP, DOWN, LEFT, RIGHT, OK and ENTER. Three
of the keys can also perform a second function (shortcut operations in SETUP mode) in addition to their
main function: The DOWN key can be used to set the camera to Photo mode (still camera icon), and the
UP key can set the camera to Video mode (movie camera icon). The RIGHT key also serves as the manual
shutter ("SHOT") button of the camera. These secondary functions are indicated by icons or text above
the key as shown on the next page.
5