Advertisement
Quick Links
Advertisement
Related Manuals for Bionaire BCM5520RC
Summary of Contents for Bionaire BCM5520RC
- Page 1 COOL MIST digital humidifier BCM5520RC MODEL Read instructions before operating. Retain for future reference. Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your humidifier, call 1-800-788-5350 in North America. 428-1098...
-
Page 2: Humidifier Safety
DO locate your humidifier on an inside wall near an electrical outlet. The humidifier should be at least 4” away from the wall for best results. 5. NEVER place humidifier in an area where it is accessible to children. - Page 3 23.If you have a warm mist humidifier, allow unit to cool before refilling water tank or maintenance as the heater bulb is hot. 24.To prevent damage to surfaces, do not place humidifier under overhanging surfaces. 25.NEVER operate unit without water in the tank.
-
Page 4: Remote Instructions
If you do not plan to use the humidifier for two or more days, make sure any residual water is drained from the water reservoir, base and wick filters to prevent algae or bacteria growth. -
Page 5: Cleaning And Maintenance Instructions
1. Turn the unit off and disconnect from the electrical outlet. 2. Remove the reservoir and main housing to access the base tray. 3. Remove the wick frame from the base of the humidifier. 4. Remove each individual wick and discard. Do not remove rivet, replacement wicks come equipped with rivets for easy replacement. -
Page 6: Storage Instructions
STORAGE INSTRUCTIONS If your humidifier will not be in use for two days or more, or at the end of the season follow these instructions. 1. Clean and dry the humidifier thoroughly as per the “Weekly Maintenance”... -
Page 7: Warranty
(2) YEARS from the date of original purchase, either to repair or replace at its option, without charge (parts and labor), any supplied or manufactured part of this humidifier which, upon inspection by an authorized service center, proves to have failed in normal use due to defects in material or workmanship, or, at its option, to replace the unit.