Using An S-Air Product - Sony 4-147-228-12(1) Operating Instructions Manual

Using an S-AIR Product

The unit is compatible with the S-AIR function
(page 122), which allows sound transmission
between S-AIR products.
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
– Surround amplifier: You can enjoy
surround speaker sound wirelessly.
– S-AIR receiver: You can enjoy system
sound in another room.
Room A
S-AIR sub unit
(surround amplifier)
Room B
Note
• You cannot operate this function if you do not insert
the wireless transceiver in the unit correctly
(page 28).
S-AIR main unit
S-AIR sub unit
(S-AIR receiver)
(not supplied)
Establishing sound
transmission between the unit
and S-AIR sub unit
(ID setting)
For the surround amplifier
For the S-AIR receiver
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission.
To set the ID of the unit
1
Set the S-AIR ID switch of the unit to
the desired ID.
COMPONENT VIDEO OUT VIDEO OUT
Y P B / C B P R / C R
HDMI OUT
LAN(100)
SPEAKER SPEAKER
CENTER SUBWOOFER FRONT R FRONT L
You can select any ID (A, B, or C).
2
Press "/1.
The system turns on.
3
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ANTENNA
EZW-RT10 COAXIAL 75
FM
TV AUDIO AM
SAT/CABLE TV EXT
DIGITAL IN DIGITAL IN DC5V 500mA MAX
L L
DMPORT A. CAL MIC
DC5V ECM-AC2
S-AIR ID
700mA MAX A B C
R R
COAXIAL OPTICAL AUDIO IN AUDIO IN
S-AIR ID switch
ID A
ID A
S-AIR sub unit
61
US