Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Function Manual page 44

Table of Contents

Advertisement

▪ The packet output to the target port is as follows.
-When the transmission packet is mirrored, it is as shown in the table mentioned below
Tag settings of address source port of packet
At the time of setting with tag
(In case of multiple address source port in the
packets of multicast, broadcast and flooding, when
the tagged settings exist in multiple source port)
At the time of settings without tag
(In case of multiple address source port in the
packets of multicast, broadcast and flooding, when
the settings without tag exist in multiple source
port)
When received packet is mirrored,
the existence and contents of VLAN tag of packet output in the target port matches with the input packets.
 When received frame is mirrored along with the re-writing of DSCP and ip precedence, instead of the received
frame, the frame after change is mirrored
Contents of mirror packet
Tagged.
The contents of tag are tagged
only when it is attached to the
sending source port.
Not tagged.
Page 44 of 71

Advertisement

Table of Contents
loading

Table of Contents