Table of Contents
Advertisement
The authentication method and characteristics of each EAP are shown below.
Authentication
Method
・
EAP-MD5
・
・
・
EAP-TLS
・
・
・
・
EAP-TTLS
・
・
・
PEAP
・
・
Attribute for VLAN ID notification
At the time of remote authentication, attribute information when setting VLAN ID assigned to Supplicant to RADIUS
server, is shown below.
Tunnel-Type
Tunnel-Media-Type
Tunnel-Private-Group-ID
) The number in () is a decimal value which is set as an attribute.
Authentication standards of ID and password base.
User himself can change the password etc., hence reducing the load on the administrator.
Authentication can be done according to the information (Subject) given in the certificate.
Approval by using digital certificate which is registered in both client (User terminal) and server
can be done.
Expired user certificate can be 'checked' or rejected.
Certificate revocation list (CRL) is reflected and access of invalid certificate can be denied.
Authentication standards of ID and password base.
Certificate is not required for user terminal.
The cost burden can be reduced and high security level can be maintained at the time of
introduction.
Authentication standards of ID and password base.
Certificate is not required for user terminal.
The cost burden can be reduced and high security level can be maintained at the time of
introduction.
User himself can change the password etc., hence reducing the load on the administrator.
Name
Number
64
65
81
Characteristics
Attribute Value ()
VLAN（13）
802（6）
VLAN ID (Coding the decimal notation by ASCII code.)
Page 37 of 71
Advertisement
Table of Contents
