Siemens AC5200 Quick Start Manual page 17

Menu Navigation Options
Menu Structure
1) System Information 1) General Information
2) Supply Voltage
3) Software Versions
2) Network Settings 1) View IP Settings
2) Change IP Settings
3) Telnet settings
4) Reset to apply changes
3) Compact Flash 1) Entro Firmware / Upgrade
AC5200 Firmware
Siemens AB
Security Products
1) IP Address Enter IP Address
2) Subnet Mask Enter Subnet Mask
3) Gateway Address Enter Gateway Address
4) Host Address Enter Host Address
5) Port Address Enter Port Address
1) To Disable / To Enable
1) Reset and apply changes
Keys Result
1-1 Returns the serial number, model and hard-
ware type.
1-2 Returns the power supply and battery voltage.
Note the battery voltage des not automatically
update
1-3 Returns the Application version information
2-1 Returns the IP settings
2-2-1 IP address is set
2-2-2 Subnet Mask is set
2-2-3 Gateway Address is set
2-2-4 Host Address is set
2-2-5 Port Address is set
2-3-1 Toggles telnet access Enabled Disabled
2-4-1 Resets the AC5200 and applies all network
changes.
3-1 Firmware upgrade will commence and a status
will be displayed on the bottom line.
Menu Navigation
17
10.2013