Connecting The Tv - Sony 3-283-036-11(3) Operating Instructions Manual

2 Connecting the TV

For video output to your TV, check the video input jacks of the TV, and select connection method A
or B. Picture quality improves in order from A (standard) to B (HDMI).
When the TV has the digital optical or coaxial output jack, you can improve sound quality by
connecting with the digital cord (A).
Digital optical cord
(not supplied)
Digital coaxial cord
(not supplied)
L IN
D IG IT A
O P T IC A L
L
C O A X IA
T V
To the digital coaxial output
jack of the TV
To the digital optical output
jack of the TV
SPEAKER
DIGITAL IN
CENTER SUBWOOFER
COAXIAL OPTICAL
TV
HDMI* cable
(not supplied)
O U T
H D M I
To the HDMI IN jack of the
TV
* HDMI (High-Definition Multimedia Interface)
If your TV has the HDMI jack, use this connection and select the type of output signal (page 22).
Note
• During the "DMPORT" function, video signal is not output from the HDMI OUT jack.
• The system can accept both digital and analog signals. Digital signals have priority over analog signals. (COAXIAL
has priority over OPTICAL.) If the digital signal ceases, the analog signal will be processed after 2 seconds.
or
SPEAKER
FRONT R FRONT L SUR R SUR L
DC5V
0.7A MAX
HDMI OUT DMPORT
SCART (EURO AV) cord
(not supplied)
P U T
O U T
To the SCART (EURO AV) jack
of the TV
Rear panel
ANTENNA
COAXIAL 75
AM
FM
EURO AV
OUTPUT(TO TV)
O A V
E U R
T V )
(T O
15
GB