Sony Walkman NWZ-E443 Operation Manual page 110

110
110
Troubleshooting
Timer
The alarm does not function.
 When setting the alarm, the setting was stopped halfway or the player was turned
off without confirming the setting of the hour and minutes.
 The alarm does not function while the player is connected to a computer.
 Disconnect the USB cable.
 The remaining battery power is low or insufficient.
 Charge the battery by connecting the player to a running computer (  p. 17).
Other
There is no beep sound when the player is operated.
 [Beep Settings] is set to [Off].
 Set [Beep Settings] to [On] (  p. 88).
 The beep does not sound when the player is connected to the optional cradle, or
another device.
The player gets warm.
 The player may become warm when the battery is being charged and just after
charging. The player also may get warm when a large amount of data is transferred.
This behavior is normal and not cause for a concern. Set the player aside for a while
to allow it to cool down.
The date and time have been reset.
 If you left the player for a while with the battery used up, the date and time may be
reset. This is not a malfunction. Charge the battery until
and set the date and time again (  p. 20, 90).
appears on the screen