List Of Parameters - JUKI PS-800-12080 Instruction Manual

4-25. List of parameters

Classifica-
tion of pa- Parameter name
rameters
Automatic Pressing plate is lifted
machining after the completion of
automatic machining
Number of stitches sewn
under pressure at the
beginning and end of
sewing
Thread trimming after the
completion of automatic
machining
Return position after the
completion of automatic
machining
Thread clamp during
jump
Reference sewing ma-
chine setting is remained
at "no change"
Cassette clamp is driven
at the beginning of sew-
ing
Clamp is driven in prior
during manual feed
Number of repetitive re-
verse feed stitches at the
beginning of sewing
Number of stitches to op-
erate the thread clamp at
the beginning of sewing
Intermediate presser
height at the beginning of
sewing
Intermediate presser
height at the end of sew-
ing
Presser foot setting at
the beginning and end of
sewing
Thread trimming motor
resetting at the end of
sewing
Intermediate presser
motor resetting at the end
of sewing
Standard
Range
value
Provided / not provid- Provided
ed
0 to 8 2
Provided / not provid- Provided
ed
Origin / secondary Origin
origin
Provided / not provid- Not provid-
ed ed
Provided / not provid- Not provid-
ed ed
Provided / not provid- Not provid-
ed ed
Provided / not provid- Not provid-
ed ed
OFF / 1 / 2 OFF
0 to 255 0
0 to 4 0.5
0 to 4 0.5
Normal / half cut / Normal
increase
Provided / not provid- Provided
ed
Provided / not provid- Provided
ed
– 39 –
Meaning of parameter and comment
Cassette clamp is lifted every time the
continuous sewing cycle is completed
Number of stitches during which the in-
termediate presser presses the material
at the beginning and end of sewing
Thread trimming is carried out every
time the continuous sewing cycle is
completed.
"Origin" is the origin of absolute coordi-
nates.
"Secondary origin" is the secondary
origin (offset point) added to the pattern.
Whether the thread clamp is turned OFF
during jump
Whether the cassette clamp is turned
ON at the beginning of sewing
Whether the cassette clamp is turned
ON before the manual feed is carried
out
In the case of set value "1" or "2", sew-
ing is carried out once or twice in rep-
etition at the first needle entry position
before proceeding to the next needle
entry position at the time of starting the
sewing machine.
Setting of the number of reverse feed
stitches at the beginning of sewing
In the case of "OFF", the sewing ma-
chine does not repeat sewing
Thread clamp is turned OFF for the
predetermined number of stitches to be
sewn from the beginning of sewing
Intermediate presser height at the be-
ginning of sewing
Intermediate presser height at the end
of sewing
Thread trimming motor is reset at the
end of sewing
Intermediate presser motor is reset at
the end of sewing