Sony MDR-IF330RK Operating Instructions Manual page 5

Note
If your audio/video equipment has a stereo mini
jack (LINE OUT), connect the stereo mini jack
(LINE OUT) to LINE IN (B) of the transmitter by
using optional connecting cord RK-G136HG.
Connecting the LINE OUT jack of your audio/
video equipment to PHONES IN (A) of the
transmitter will cause low or muffled sound. To
connect to PHONES IN (A) of the transmitter
with the supplied cord, use a headphones jack on
the audio/video equipment.
b When connecting the transmitter to a
headphones jack.
Connect to PHONES IN (A) jack only.
Transmitter
to PHONES IN (A) jacks
Left channel (white)
Right channel
(red)
Connecting cord
(supplied)
Unimatch plug
adaptor
(supplied)
to headphones
jack (stereo
phone plug)
to headphones
jack (stereo
mini plug)
Discman,
WALKMAN*, TV,
VCR, etc.
When connecting two audio/video
equipment to the transmitter at the
same time
This transmitter can be connected to two
different audio sources at the same time
using both inputs, PHONES IN (A) and
LINE IN (B).
Select position A or B on the transmitter to
select transmitter input. Audio/video
equipment connected to PHONES IN (A)
will be output when in position A, and
audio/video equipment connected to LINE
IN (B) will be output when in position B.
Note
If you connect two pieces of audio/video
equipment to this unit at the same time, use the
supplied cord and optional connecting cord
RK-G129 or RK-G136HG.
2
If your AC power adaptor is equipped
with a voltage selector, before
connecting the AC power adaptor to an
AC outlet, set it to the operating voltage
in your area with a screw driver.
AC power adaptor (supplied)
VOLTAGE SELECT
220V
240V 220V 110V
(Continue to next page)
120V
5