Handling Precautions; Installation Precautions - Toa MX-6224D Operating Instructions Manual

5. HANDLING PRECAUTIONS

• The supplied power supply cord is designed to be used exclusively with the unit. Do not connect it to any other
equipment.
• Install the unit in locations where the temperature is between 0 and 40 °C and the moisture is between 35 and
80% (no dew condensation must be formed).
• The unit is a precision audio component. To prevent failure, avoid locations where the unit may be exposed
to strong shocks or vibrations.
• To clean, be sure to first switch off the unit's power, then wipe with a dry cloth. Never use benzene, thinner,
alcohol, or chemically-treated cleaning cloth because such volatile liquids could deform or discolor the unit.

6. INSTALLATION PRECAUTIONS

• Be sure to install and connect the unit before the connection to the AC mains outlet. Remove the unit's power
supply cord from the AC mains outlet when uninstalling or disconnecting the unit.
• The socket-outlet shall be installed near the unit and the plug shall be easily accessible.
• Ensure that the unit is located at least 10 cm away from ceiling and wall surfaces, as shown in the figure
below, to allow adequate cooling and thus prevent extreme increases in temperature inside the unit. Also, do
not place any other devices within that range.
6
Over 10 cm
Over 10 cm
Over 10 cm