Table of Contents
Advertisement
17. Control input terminals
Allows
input
connected external equipment to enable
actions set in the Event settings.
18. DIP switch
• LINE/MIC switch (Switch 1)
Set this switch to MIC when connecting a
microphone, and to LINE when connecting
a general sound source device other than
a microphone.
Default setting: LINE
[Bottom]
The figure with a removable terminal plug detached.
19. Rubber feet attachment position
20. Reset key
The unit begins to restart when this key is
clicked.
7. HANDLING PRECAUTIONS
• Please apply the latest firmware version to this product. The latest version is available at the TOA
DATA Library (https://www.toa-products.com/international/).
• As this product is IP-based, a slight time lag between actual and broadcast may happen.
• Broadcast audio may sometimes break up due to packet loss or network failure.
• Periodic inspection and manual rebooting are needed to extend the product life.
This product may reboot automatically to keep the stable operation.
•
of
control
signals
19
20
• PAD switch (Switch 2)
from
Enables or disables the MIC input pad.
When the input level is high, set the PAD
to –20 dB.
Default setting: 0 dB
• PHANTOM switch (Switch 3)
Set whether or not to supply phantom
power to the microphone connected to
MIC IN. Phantom power is a 12 V DC.
Default setting: OFF
Hold down this key until the Status indicator
(1) lights yellow to initialize the unit's
settings.
9
Advertisement
Table of Contents
