Troubleshooting - Panasonic ER-SB60 Operating Instructions Manual

Lubrication
• Apply the oil to the blade before and after each use.
1
Remove the blade.
(See this page.)
2
Apply a drop of the oil to each
indicated point.
3
Attach the blade to the main
body, turn on the power and
allow to run for
approximately 5 seconds.
► Replacement part
Replacement part is available at your dealer or Service Centre.
Replacement part for ER‑SB60/
ER‑SB40
Removing and mounting the blade
► Removing the blade
Hold the main body with the switch
facing upward and push the blade with
your thumb while catching the blade in
your other hand.
16
ER-SB60_40_EU.indb 16
Blade WER9621
► Mounting the blade
Fit the mounting hook (B) into the blade mounting (A) on the
main body and then push in until you hear a click.



Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service centre authorized by
Panasonic for repair.
Problem
The power switch does Unlock the switch lock.
not turn ON. (See page 12.)
Until problems are solved, please
follow each procedure as follows;
The appliance has
1. Charge the appliance.
become blunt.
2. Clean the blade and apply oil.
Operating time is short.
3. Replace the blade.
Appliance stopped
functioning.
4. Have the battery replaced by
The appliance cannot be Insert the appliance plug into the
charged. appliance firmly.
Action
(See page 11.)
(See pages 15 and 16.)
(See page 16.)
an authorized service centre.
2017/05/25 11:00:22