Panasonic ER-SB60 Operating Instructions Manual page 13

Removing and mounting the attachments
• Take care not to injure hands, etc., with the blade when removing
or mounting the attachment.
• Turn the appliance off.
► Mounting the attachment
Mount the attachment to the
main body until it clicks.
• If the attachment is not
attached correctly, it may shift
and end up cutting too much
during use.
► Removing the attachment
Hold the main body securely and
remove the attachment from the
main body.
ER-SB60_40_EU.indb 13
Trimming height comb attachment
(Trimming height: approx. 1 mm to 10 mm)
• Actual hair length will be a little longer than the height you set.
► How to adjust the trimming height
Turn the dial and adjust the trimming height
indication mark (a) to the desired height.
click
Indicator
Trimming height (mm)
(estimate)
Indicator
Trimming height (mm)
(estimate)
► Trimming to an even length
Holding the appliance with the power
switch facing outwards, trim by
bringing the blade in contact with
the skin and moving the appliance
against the flow of the beard.
• Hair trimmings may collect inside the
attachment when a large volume of beard is
cut, so discard hair trimmings after each use.

1 2 3 4
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
6 7 8 9
6 6.5 7 7.5 8 8.5 9 9.5 10
2017/05/25
5
10
13
11:00:22