1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long.
4 Disassembly and Assembly Instructions 4.1. Disassembly Instructions. 4. Remove the 4 screws to detach the front panel. 1. Remove the blade block. 5. Align the body block mark with location [3] and slide the dial downwards to detach it. 2.
Page 6
6. Remove the switch button, dial click and spring. 9. Remove the rechargeable battery. *Be careful not to lose the dial click and spring. 7. Remove 3 screws and detach the retaining plate and 10. Remove the 2 screws to detach the linear motor block waterproof rubber.
Page 7
4.2. Key points of Disassembly/ *Precautions for mounting the waterproof rubber. Make sure to mount the waterproof rubber to cover the sur- Assembly. rounding area. *Replace the blade springs. Replace the blade spring placed between the ribs. Be careful of the direction to attach the blade spring. 4.3.