Service - Asko D5896XXLFI Operation Instructions Manual

Once the installation is complete, the stopcock should be opened
to allow the pressure to settle for a while and to check that all
connections are tight.
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or geothermal power to
heat your home. Choosing a hot water connection cuts
programme times and reduces the dishwasher's electricity
consumption.
Electrical connection
Information about the electrical connection can be found on the
serial number plate. This specification must match the electricity
supply.
Dishwashers fitted with a plug must be connected to an earthed
socket.
The electric wall socket must be placed outside of the installation
area to be easily accessible after installing the dishwasher. Do
not use an extension cord!
NOTE!
Repairs and maintenance relating to safety or performance
must be carried out by a qualified professional.

Service

Read chapter Troubleshooting before contacting the service
department. Note down the details on the serial number plate
positioned on the right inside the dishwasher. Note down the item
number (1) and serial number (2).
1
ART. NO.
SERIAL NO.
2
23