Data Cartridge Selection - Sony TSL-S11000 User Manual

Data Cartridge Selection

You can select data cartridges loaded into the magazine as necessary by using
the software on your computer.
Data cartridges can be selected with the SELECT and ENTER buttons on this
machine, by the following procedure.
1
Press the SELECT button to display a cartridge number on the LCD, and
press it repeatedly to change the selected data cartridge number.
2
When the desired cartridge number is selected, press the ENTER button.
The cartridge currently in the DDS drive is unloaded, and the cartridge
selected above is loaded into the drive.
Cautions:
• After inserting the magazine, about 90 seconds are needed for checking
the cartridges in the magazine. During that time, the SELECT button is
disabled. The SELECT button is also disabled when "Ready" is not
displayed.
• When Autoload is set to ON by the Menu screen and a magazine is inserted,
the first cartridge is loaded into the DDS drive automatically after the
cartridges within the magazine have been checked.
• The SELECT and ENTER buttons have no effect if pressed while the
BUSY indicator is flashing.
27
Chapter 3 Operation