Using The Basic Menu - Sony Wega Trinitron KV-27FS13 Operating Instructions Manual

Fd trinitron wega color tv
Hide thumbs Also See for Wega Trinitron KV-27FS13:
Table of Contents

Advertisement

Operating Instructions
Cable stations
don't seem to
work
Remote control
does not
operate
Cannot change
channels with
the remote
control
The TV needs
to be cleaned
Lost password
for Parental
Control
Cannot access
other menus
when using the
Basic Menu
The remote
control won't
work in PIP
mode
There is no
window picture
or it is just
static
42
Make sure Cable is set to ON in the Channel Setup

menu (page 26).
Perform Auto Program to add channels that are not

presently in the memory (page 17).
Batteries could be weak. Replace them (page 2).

Move the TV 3-4 feet away from fluorescent lights.

Make sure you have not inadvertently switched your

TV from the channel 3 or 4 setting if you are using
another device to change channels.
If you are using another device to control channels, be

sure the FUNCTION button for that device has been
pressed. For example, if you're using your VCR to
control channels, be sure to press the VCR/DVD
FUNCTION buttons (page 15).
Clean the TV with a soft dry cloth. Never use strong

solvents such as thinner or benzine, which might
damage the finish of the cabinet.
In the password screen, enter the following master

password: 4357. After using the master password, you
must create a new password; it cannot be used to
unlock currently blocked channels.
If you use the

the Basic menu appears when you press
have access to the other menus, use the
select Advanced Menu (page 36).
Press the TV FUNCTION button. You may have

inadvertently pressed the VCR/DVD FUNCTION
button, which changes the PIP buttons to VCR mode
(page 15).
Be sure your window picture is set to a video source/

channel that has a program airing.
You may be tuned to a video input with nothing

connected to it. Try cycling through your video inputs
using the yellow PIP TV/VIDEO button with the red
dot (page 18).
PIP is not set to receive a signal from the AUX input. If

you have connected a VCR, DVD or Satellite Receiver
to the AUX input on the TV, it will not show in the
small window picture.
button to close the Basic menu, only
again. To
F
button to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents