Sony Wega Trinitron KV-27FS13 Operating Instructions Manual page 22

Operating Instructions
TV, Satellite Receiver, and VCR
Satellite
antenna
cable
4
1
Satellite Receiver
1
Connect the cable from your satellite antenna to SATELLITE IN on
your satellite receiver.
2
Connect the coaxial cable from your cable or antenna to the
IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your
VCR to the VHF/UHF jack on your TV.
4
Using Audio/Video cables (not supplied), connect AUDIO and
VIDEO OUT on your satellite receiver to AUDIO and VIDEO IN on
your VCR.
5
Using Audio/Video cables (not supplied), connect AUDIO and
VIDEO OUT on your VCR to AUDIO and VIDEO IN on your TV.


To view from the satellite receiver or VCR, select the video input to which
your satellite receiver or VCR is connected by pressing
control.
10
From
cable/
antenna
VCR
5
Rear of TV
2
3
on the remote
Video (yellow)
Audio L (white)
Audio R (red)