Connecting The Ac Power Cord; Selecting The Default Settings - Sony LMD-9050 Operating Instructions Manual

Connecting the AC Power Cord

Attach the AC adaptor to the monitor, and then
connect the supplied AC power cord.
Attach the AC plug holder to
the AC power cord, and
connect it to the AC IN
connector so that the cord
does not come loose.
Note
Connect a ground before connecting the AC plug. To
disconnect the ground, first disconnect the AC plug and
then the ground.
20

Selecting the Default Settings

AC power cord (supplied)
AC plug holder (supplied)
Selecting the Default
Settings
When you turn on the unit for the first time after
purchasing it, select the area where you intend to use this
unit from among the options.
The default setting values for each area
5
4
3
3
1 NORTH AMERICA
ARGENTINA
2 LATIN AMERICA
PARAGUAY
PAL&PAL-N AREA
URUGUAY
NTSC&PAL-M AREA OTHER AREA
3
AFRICA AUSTRALASIA
EUROPE MIDDLE-EAST
NTSC AREA
4 ASIA EXCEPT JAPAN
PAL AREA
5 JAPAN
3
1
2
COLOR COMP NTSC
TEMP LEVEL SETUP
Low BETA7.5 7.5
Low SMPTE 0
Low SMPTE 0
Low SMPTE 0
Low BETA7.5 7.5
Low SMPTE 0
Low BETA7.5 7.5
Low SMPTE 0
High SMPTE 0