Audio; Channels - Sony KE-37XS910, KE-42XS910 Operating Instructions Manual

Audio

Problem
Good picture, no sound
Audio noise
Cannot gain enough volume
when using a cable box
Sound seems weak or
insufficient
Cannot raise the volume on
external speakers

Channels

Problem
Cannot receive upper channels
(UHF) when using an antenna
TV is fixed to one channel
Cannot receive any channels
when using cable TV
Cannot receive or select
channels
Possible Remedies
s Press MUTING so that
s Make sure the Speaker
s
Communication problems may occur if the infrared communication equipment
(e.g., infrared cordless headphones) is used near the TV. Please use headphones
other than infrared cordless headphones. Also, if you use the infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the TV until the noise is eliminated, or move the
transmitter and receiver of the infrared communication equipment closer together.
s
Increase the volume of the cable box using the cable box's remote control. Then
TV FUNCTION
press
s The TV's audio might be set to
Stereo. In the Audio Menu (see page 86), set the
already set to Stereo, switch to
during weak stereo broadcasts).
s
If the Speaker option is set to
order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 87). Or, to use the TV remote control, set the
option to Variable.
s
To turn on the TV speakers, set the
Possible Remedies
s Cable
Change the option to
s Use Auto Program in the Channel Menu to add receivable channels that are not
presently in the TV's memory (see page 90).
s Auto Program
Use in the Channel Menu to add receivable channels that are not
presently in the TV's memory (see page 90).
s
Check your Channel Fix settings (see page 90).
s Auto Program
Use in the Channel Menu to add receivable channels that are not
presently in the TV's memory (see page 90).
s Make sure the Cable
s Auto Program
Use in the Channel Menu to add receivable TV channels that are
not presently in TV memory (see page 90).
Muting disappears from the screen (see page 50).
option is set to On in the Audio Menu (see page 87).
and adjust the TV's volume.
Auto SAP or Mono, when it might be better set to
Mono
(which may reduce background noise
Off and the Audio Out
Speaker option to
Off
(see page 90).
option is set to On in the Channel Menu (see page 90).
MTS setting to Stereo. If
option is set to Fixed
Audio Out
On (see page 87).
105
(in