Sony KE-37XS910, KE-42XS910 Operating Instructions Manual page 35

VHF/UHF
Antenna cable
(supplied)
Notes on Using This Connection
To Do This ...
Watch cable (unscrambled)
channels
Watch cable box (scrambled)
channels
Watch the VCR
Set up the TV remote control to
operate the cable box or VCR
Activate the remote control to
operate the cable box or VCR
Control specific cable box and
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected to
the TV
Rear of TV
R -AUDIO- L
(MONO)
R -AUDIO- L
AUDIO OUT
(VAR/FIX)
TO
CONVERTER AUX
Cable box
Do This ...
Press TV/VIDEO
Turn on the VCR and tune it to the channel the cable box is set to (usually channel 3
or 4). Press TV/VIDEO
illustration). Use the cable box to change channels.
TV/VIDEO
Press
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on page 52.
For the cable box, press
For the VCR, press
See "Operating a Cable Box" on page 55 and "Operating a VCR" on page 54.
See the instructions for setting up Video Labels on page 96.
Do not leave the display indication of the cable box and VCR
turned on.
VIDEO IN DVI-HDTV IN
1
R -AUDIO- L
3
VIDEO S VIDEO
R -AUDIO- L Y
WOOFER OUT
HD/DVD IN
(VAR)
(1080i/720p/480p/480i)
Splitter
(not supplied)
Coaxial cable
repeatedly to select the cable input (CABLE in the illustration).
repeatedly to select the VCR input (VIDEO 1 in the
repeatedly to select the VCR input (VIDEO 1 in the illustration).
SAT/CABLE FUNCTION.
VCR/DVD FUNCTION.
6
DVI-HDTV
4
5
P P
B R
A/V cable
VCR
33