Sony KDL-V26XBR1, KDL-V32XBR1, KDL-V40XBR1 Operating Instructions Manual page 86

Using the Settings
z The Skip label is useful
for inputs to which no
equipment is
connected.
z If you use the
composite connection
when Video 2
(Component) is set to
Auto, do not connect
the component cable at
the same time.
Otherwise select Off.
z To change from one
Power Saving option to
another, use POWER
SAVING on the remote
control.
86
Option Description
Video 1-6
Video 7
If you select Skip, your TV skips this input when
you press the TV/VIDEO button.
Language Select to display all on-screen settings in your language of
choice: English, Español, Français.
Video 2 Auto
(Component)
Off
Menu Color Enables you to select a specific color for the on-screen settings.
Not available when using the Photo/Video Viewer.
Power Saving Standard
Reduced
Picture Off
Picture Off is not available when using the
Photo/Video Viewer.
Light Sensor Select
sensor measures the room brightness which allows the TV to
automatically adjust the picture brightness based on the picture
settings and the ambient room light conditions.
Be sure not to put anything around the sensor, as
its function may be affected.
See page 15 on the sensor.
CineMotion
Select
detecting film content and applying a reverse 3-2 pull down
process. Moving picture will appear clearer and more natural
looking. Select
Video 1-6, VHS, DVD, Receiver, Satellite,
Cable Box, 8mm, DTV, Game, LD, Beta,
HD, DVR, Camcorder, Skip
Video 7, PC, DVD, HD, Game, Skip
Select to switch automatically between the
component video jacks (Y P
AUDIO L (MONO)/AUDIO R) and the
composite video jacks (VIDEO, AUDIO L
(MONO)/AUDIO R) on the left side of the
TV (VIDEO/HD/DVD 2 IN) depending on
the cable connection.
Select to activate the composite video jacks
(VIDEO/AUDIO L(MONO)/
AUDIO R) on the left side of the TV.
Select to view picture without the benefit of
Power Saving.
Select to view picture with reduced power
consumption.
It also enhances the black level.
Select to turn off the picture. Audio stays on
with your selected volume setting.
On
to enable the automatic brightness control. The light
Auto
to optimize the screen display automatically
Off
to disable the detection.
/C P /C ,
B B R R