Installing The Tv; Preventing The Tv From Toppling Over - Sony KDL-V26XBR1 Operating Instructions (KDLV40XBR1) Operating Instructions Manual

Installing the TV

Preventing the TV
from Toppling Over
Attaching the Support Belt
1
Screw the support belt (supplied) to the TV stand with a wood screw
(supplied).
2
Attach the support belt to the stand, and screw the belt with a securing
screw (supplied) using a coin, etc.
3
Adjust the length by pulling the support belt towards you while holding
the TV stand.
Be sure to take measures to prevent the TV from toppling over and
causing injury.
If the supplied wood screw does not fit depending on the type of
TV stand, or when the securing strength is not enough, prepare
commercial screws (3 to 4 mm (1/8 to 3/16 inches) diameter) to fit
to the TV stand. Consult your dealer about the types of screw.
When Mounting on a Wall
Be sure to use the following optional wall-mount brackets to hang the TV on
the wall.
KDL-V26XBR1/KDL-V32XBR1: SU-WL31
KDL-V40XBR1: SU-PW2
See the Instruction Guide supplied with the wall-mount bracket on how to
mount the TV on the wall.
Introducing the TV
13