Sony BRAVIA KDL-46V25L1 Operating Instructions Manual page 21

qf
qg
qh
qj
qk
ql
Insert two size AA batteries (supplied) by matching the e
and E on the batteries to the diagram inside the remote
control's battery compartment.
Button Description
qf WIDE Press repeatedly to step through the Wide Mode settings:
Wide Zoom, Normal, Full, Zoom. The Wide Mode settings
can be also accessed in the Screen settings. See page 29.
Changing the Wide Screen Mode
4:3 Original source
Standard definition source
Wide Zoom
Normal
Full
Zoom
qg DISPLAY
Press once to display the current channel number, channel
label, time and Wide Mode settings. The OSD (on screen
display) will turn off after a few seconds or press again to
immediately turn off the display.
qh V/v/B/b Press V/v/B/b to move the on-screen cursor. Press
select/confirm an item.
qj TOOLS
Press to display the Tools Menu that is associated with your
current input: Analog TV, Digital TV, External Inputs, and PC.
Each input has a different Tools Menu. (See page 26, 28, 31,
36 and 37.)
qk JUMP
Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel that
was selected among the digital or analog channels. It will not
cross over from digital to analog, or from analog to digital.
ql CH +/–
Press to scan through channels. To scan quickly through
channels, press and hold down either +/–.
m
When the TV receives a 720p, 1080i or 1080p
signal, Normal cannot be selected.
Depending on the input signal, menus you can
select may vary.
Push and slide to open
Basic Operations
(see page 29 for details)
16:9 Original source
High definition source
m
Wide Zoom
Normal
This mode is not available
Full
Zoom
to
21