Configuring The Phone Screen Saver - Cisco SPA 504g User Manual

always on
•
STEP 5 Press ok.
STEP 6 Press save.

Configuring the Phone Screen Saver

You can enable your phone's screen saver and specify its appearance and the amount of time for the
phone to be idle before it begins. Some of these options can be configured from your PC using the web
configuration utility.
To configure your screen saver:
STEP 1 Press the Setup button.
STEP 2 Select Screen Saver Mode.
To enable your screen saver:
STEP 1 In Screen Saver Mode, Choose Enable Screen Saver and press edit.
STEP 2 Press y/n to choose yes (enable) or no (disable).
STEP 3 Press ok.
STEP 4 Press save.
To specify the amount of time before the screen saver turns on if your phone is idle:
STEP 1 In Screen Saver Mode, choose Screen Saver Wait Time and press edit.
STEP 2 Enter the time, in seconds, to wait before the screen saver starts.
STEP 3 Press ok.
52