Setting Call Waiting - Cisco SPA 504g User Manual

Disabling Do Not Disturb
Do Not Disturb Softkey
To deactivate Do Not Disturb, press the -dnd softkey.
Do Not Disturb Deactivation by using Setup
You can also deactivate Do Not Disturb by pressing the Setup button and selecting
Preferences > Do Not Disturb.

Setting Call Waiting

Call waiting alerts you to an incoming call while you are on another call by ringing your phone and
displaying a status message. If you turn call waiting off, incoming calls do not ring your phone while you
are on another call; the incoming call hears a busy signal or message. Call waiting can be enabled
continuously or on a per-call basis.
You can also turn call waiting on or off from your PC by using the IP phone Web interface.
Using Setup
STEP 1 Press Setup.
STEP 2 Select Preferences.
STEP 3 Choose Call Waiting and press edit.
STEP 4 Press the y/n softkey to toggle call waiting on or off.
STEP 5 Press ok.
STEP 6 Press save.
38