Using Basic Call Management Functions; Managing The Audio Source And Volume - Cisco SPA 504g User Manual

Using Basic Call Management Functions

This chapter provides instructions on using your basic phone functions.

Managing the Audio Source and Volume

Adjusting Call Volume
To adjust the volume of the handset or speaker, lift the handset or press the Speaker button. Press +
on the Volume button to increase the volume, or press - to decrease the volume. Press Save.
Adjusting the Ringer Volume
To adjust the ringer volume, press + on the Volume button to increase the volume, or press - to decrease
the volume when the handset is on-hook and the speaker button is off. Press Save. (Not available for
the Cisco SPA501G.)
Using Mute
To mute the handset, speaker, and headset microphones, press Mute. The button lights red. Press Mute
again to unmute.
If no audio device is on, pressing Mute has no effect. When switching from the speaker phone to the
handset, the phone is unmuted automatically.
Using the Speakerphone
To use the speakerphone, press Speaker (the handset can be either on or off hook).
25