How To Adjust The Copy Control Dial For Forms Thickness; How To Replace A Ribbon - IBM 5100 Basic Reference Manual

("
(
(
(
Printer Cover
(
How to Adjust the Copy Control Dial For Forms Thickness
1. If you are using singlepart forms, set the copy
control dial on O.
2. If you are using multipart forms and the last sheet
is not legible, rotate the copy control dial toward 0
one click at a time to obtain the legibility you desire.
3. If you are using multipart forms and the ribbon is
smudging the first sheet, rotate the copy control
dial toward 8 one click at a time until smudging
stops.
How to Replace a Ribbon (Part Number 1136653)
Forms Tractor
1.
2.
3.
Turn off power to the printer.
Tilt the forms tractor back by lifting both sides at the
front.
Open the printer cover by sliding it forward.
17~