Noise Reduction; Av2 Output - Sony FD Trinitron KV-29LS35K Instruction Manual

Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK

NOISE REDUCTION

The "Noise Reduction" option in the "Detail Set
Up" menu allows you to automatically reduce
the picture noise visible in the broadcast signal.
To do this: after selecting the option, press
Then press
Detail Set Up
press OK to confirm and store.
Noise Reduction: Auto

AV2 Output:

TV
RGB Centring: 0
Picture Rotation: 0
To cancel this function afterwards, select "Off"
instead of "Auto" in the step above.
OK
AV2 OUTPUT
The "AV2 Output" option in the "Detail Set
Up" menu allows you to select the source to be
output from the Scart connector
order you can record from this Scart any signal
coming from the TV or from an external
equipment connected to the Scart connector
Detail Set Up
:1/
Noise Reduction: Auto
AV2 Output: TV
RGB Centring: 0
Picture Rotation:
0
If your VCR supports Smartlink, this
OK
procedure is not necessary.
To do this: after selecting the option, press
Then press
output signal: TV, AV1, AV3, YC3 or AUTO.
If you select "AUTO", the output signal
will always be the same one that is
displayed on the screen.
If you have connected a decoder to the
Scart
this Scart, please remember to change back
the "AV2 Output" to "AUTO" or "TV" for
correct unscrambling.
or to select Auto. Finally
:2/q
or side connectors 3 and
or to select the desired
:2/q
or to a VCR connected to
Menu System
.
in
GB
3.
.
continued...
15