Bravia Sync™ With Control For Hdmi - Sony BRAVIA XBR KDL-46XBR10 Operating Instructions Manual

®
BRAVIA Sync™ with Control for HDMI
The BRAVIA Sync function allows this unit to communicate with other Sony equipment
supporting the Control for HDMI function.
To connect Sony equipment with Control for HDMI
Use an HDMI cable that bears the HDMI logo for connection.
Line up the triangle on the head of the HDMI cable with the triangle on the label of the HDMI
input when connecting the HDMI cable.
Setting the Control for HDMI
The Control for HDMI function must be set up in order for the unit to communicate with other
Control for HDMI enabled equipment.
To setup the unit's Control for HDMI:
1
Select Channels & Inputs on the Settings menu.
2
Highlight HDMI Settings and press
3
Select Control for HDMI and set it to On.
To verify connected devices, select Device List from the HDMI Settings menu.
For other equipment, refer to its operating instructions.
Available options using Control for HDMI
The following operations are available after you connect the supported Sony equipment with
Control for HDMI function to your unit:
• Automatically turn off the connected equipment when you turn off the unit.
• The connected equipment and unit are turned on by One-Touch-Play.
• Possible operations with SYNC MENU buttons, see page 23.
When a Sony A/V receiver with BRAVIA Sync is connected, the following additional operations
are possible:
• Turning on the A/V receiver when the unit is turned on.
• Automatically switching to the audio output of the A/V receiver's attached speakers.
• Adjusting the volume and muting of the A/V receiver with the unit's remote control.
.
47