Removing The Terminal Cover For Monitor; Installing The Unit Against A Wall Or Enclosed Area - Sony BRAVIA XBR KDL-46XBR10 Operating Instructions Manual

Removing the Terminal Cover for Monitor

Installing the Unit Against a Wall or Enclosed Area

Make sure that your unit has adequate ventilation. Allow enough space around the unit as shown
below. Avoid operating the unit at temperatures below 41 °F (5 °C).
Monitor
Installed with stand
4 inches
(10 cm)
Leave at least this much space around the set.
Never install the monitor as follows:
Air circulation is blocked.
Media receiver
Top
2 inches
(5 cm)
Leave at least this much space around the set.
• Inadequate ventilation can lead to overheating of the unit and may cause unit damage or cause a fire.
2
1
7 /
11 inches
8
(30 cm)
4 inches
(10 cm)
Air circulation is blocked.
Wall
Front
2 inches
2 inches
(5 cm)
(5 cm)
Installed on the wall
3 /
2 inches
8
4 inches
(6 cm)
(10 cm)
Wall
2 inches
(5 cm)
2 inches
(5 cm)
7 /
11 inches
8
(30 cm)
4 inches
(10 cm)
Leave at least
this much space
around the set.
4 inches (10 cm)
17