Grandstream Networks GSC35 Series User Manual page 77

Firmware File Prefix
Firmware File Postfix
Firmware Upgrade
Config File
Use Grandstream GAPS
Config Upgrade Via
Config Server Path
HTTP/HTTPS Username
HTTP/HTTPS Password
Always send HTTP
Basic Authentication
Information
Config File Prefix
Config File Postfix
Authenticate Conf File
Checks if firmware file is with matching prefix before downloading it. This
field enables user to store different versions of firmware files in one
directory on the firmware server.
Checks if firmware file is with matching postfix before downloading it. This
field enables user to store different versions of firmware files in one
directory on the firmware server.
Click the "Detect" button to check whether the firmware in the firmware
server has an updated version, if so, update immediately.
It is used to configure the download path and update mode for the
configuration file server.
•
If set to "Yes", the device will set the download path of the
configuration file to "fm.grandstream.com/gs" by default and use
HTTPS protocol to connect to the server.
•
If set to "No", then users can manually configure the path and update
mode for the configuration file server.
Selects provisioning method: TFTP, HTTP or HTTPS. Default setting is
"HTTPS".
Sets IP address or domain name of configuration server. The server hosts
a copy of the configuration file to be installed on the device. Default is
"fm.grandstream.com/gs".
Configures the username for the config HTTP/HTTPS server.
Configures the password for the config HTTP/HTTPS server.
Includes configured username and password in HTTP request before
receiving authentication challenge from the server.
Default is "No".
Checks if configuration files are with matching prefix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
Checks if configuration files are with matching postfix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
Sets the device to authenticate configuration file before applying it. When
set to "Yes", the configuration file must include value P1 with phone
system's administration password. If it is missed or does not match the
password, the device will not apply it. Default setting is "No".
GSC35XX Series User Manual
Version 1.0.0.15
P a g e | 77