Sony DCR-VX9000 Operating Instructions Manual page 68

Changing the lithium battery in the digital camcorder
Changing the lithium battery
When replacing the lithium battery, keep the battery pack or other power source
attached. Otherwise, you will need to reset the date, time and other items in the menu
system retained by the lithium battery.
(1) Loosen the two screws under the shoulder pad.
(2) Slide the shoulder pad toward the back of the camera.
(3) Open the lid of the lithium battery compartment.
(4) Push the lithium battery down once and pull it out from the holder.
(5) Install the lithium battery with the positive (+) side facing out. Close the lid.
(6) Slide the shoulder pad toward the front of the camera and tighten the screws.
3
68
4 5
2
1