Sony DCR-VX9000 Operating Instructions Manual page 28

Changing the mode settings
CUSTOM* <RETURN> <SET> <COLOR LEV/SHARPNESS/WB SHIFT/AE SHIFT>
<RESET>
• Select RETURN to return to the menu to change other menu items.
• Select SET to set custom preset ON or OFF.
• Select COLOR LEV/SHARPNESS/WB SHIFT/AE SHIFT to preset the color intensity
(COLOR LEV), sharpness (SHARPNESS), white balance (WB SHIFT), and brightness
(AE SHIFT) of the picture.
• Select RESET to restore the default settings.
Items for VTR mode only
AUDIO MIX*
When playing back a tape recorded with 12 bit, select this item to adjust the volume
balance between audio mode ST1 and ST2.
WIDE PB* <OFF/ON>
• Normally select OFF.
• Select ON to playback a picture recorded in the 16:9 wide mode to watch on a normal
(4:3) TV.
CM SEARCH* <ON/OFF>
• Normally select ON to turn on the cassette memory search function.
• Select OFF to search without using the cassette memory function.
DATA CODE* <DATE/CAM or DATE>
• Select DATE/CAM to display date and time, as well as various settings data, of your
recordings.
• Select DATE to display date and time, of your recordings.
When DIGITAL MODE is set to OVERLAP
You cannot set 16:9 WIDE and D ZOOM to ON. When you set the DIGITAL MODE
switch to OVERLAP, 16:9 WIDE and D ZOOM settings are changed to OFF
automatically.
About FRAME REC and INT REC setting
Both settings are automatically set to off when:
• The POWER switch is set to OFF.
• CAMERA/VTR is set to VTR.
• Turn STANDBY up to PHOTO STANDBY.
* These settings are retained even when the battery is removed, as long as the lithium
battery is in place.
28