Sony DCR-VX9000 Operating Instructions Manual page 13

When ND ON flashes in the viewfinder
Set ND FILTER to ON.
To stop recording momentarily [a]
Press START/STOP again. The "STBY" indicator appears in the viewfinder (Standby
mode).
To finish recording [b]
Press START/STOP again. Turn STANDBY down to LOCK, and set the POWER
switch to OFF. Then, eject the cassette and remove the battery pack.
[a]
START/STOP
LOCK
STANDBY
PHOTO
STANDBY
To focus the viewfinder lens [c]
If you cannot see the indicators in the viewfinder clearly, or after someone else has used
the digital camcorder, focus the viewfinder lens. Turn the viewfinder lens adjustment
ring so that the indicators in the viewfinder come into sharp focus.
To adjust the contrast and the brightness of the viewfinder [d]
To adjust the contrast, turn the CONTR knob.
To adjust the brightness, turn the BRIGHT knob.
If you want to turn off the tally lamp [d]
Set TALLY to OFF.
The rear tally lamp cannot be turned off.
[c]
[b]
START/STOP
STBY
0 : 13 : 46
106 min
LOCK
STANDBY
PHOTO
STANDBY
[d]
BRIGHT
TALLY
CONTR
START/STOP
LOCK
STANDBY
PHOTO
STANDBY
13