Sony SLV-D910B Operating Instructions Manual page 60

B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
.
B-2
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
DVD-VCR
B-1
R
AUDIO
L
VIDEO
to OUT AUDIO L/R
l: Signal flow
to audio input
[Speakers]
Rear (L)
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "Oui" in "OPTIONS AUDIO" menu (page 62). If your AV amplifier (receiver)
has an MPEG audio decoder function, set "MPEG" to "MPEG" in "OPTIONS AUDIO"
menu (page 62). Otherwise, no sound or a loud noise will come from the speakers.
60
A/V Receiver hookup
Stereo audio cord
(red)
(supplied)
(white)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(white)
AV amplifier (receiver) having
a decoder
Subwoofer
B-2
DIGITAL AUDIO OUT
COAXIAL
OPTICAL
and or
(red)
and
B-1
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
Front (L) Centre
Front (R)