Sony SLV-D910B Operating Instructions Manual page 14

3
ENTER
To cancel the Auto Set Up function
Press SET UP.
Tip
• If you want to change the language for the on-screen display from the one preset in the Auto
Set Up function, see page 15.
Notes
• Whenever you operate the Auto Set Up function, some of the settings (ShowView, timer, etc.)
will be reset. If this happens, you have to set them again.
• Auto preset starts automatically only when you plug in the mains lead for the first time after
you purchase the DVD-VCR.
• If you want to use the Auto Set Up function again, select "Installation" in the "OPTION"
menu, then press V/v to select "Installation Auto", then repeat step 3.
• Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more
during power off with no tape inserted.
14
Setting up the DVD-VCR with the Auto Set Up function
Press B/b to select your country, then press
ENTER.
The DVD-VCR starts searching for all of the
receivable channels and presets them (in the
appropriate order for your local area).
If you want to change the order of the channels
or disable unwanted programme positions, see
"Changing/disabling programme positions" on page 21.
After the search is complete, the current time appears for any stations that
transmit a time signal. If the time does not appear, set the clock manually.
See "Setting the clock" on page 16.
INSTALLATION AUTO
Merci d'attendre 10%
RETURN SET UP