Voip Settings (Sip Basically Setting) - D-Link DVG-G5402SP User Manual

DVG-G5402SP User's Manual

2-1-4 VoIP Settings (SIP Basically setting)

As there are various VoIP Service Providers, the gateway has been designed to be compatible with them
according to RFC standards. If any registration problem occurs, please consult your VoIP Service Provider.
SETUP → VOIP SETTINGS
Number: Enter the number, text or number and text in this field. It is the Caller ID for the called party when
you make a VoIP call. If you register the gateway to a SIP proxy server, then it will be the number provided
by SIP proxy server. Number and User ID/Account are usually the same from most SIP proxy severs. Each
line has a number. And the number of each line is not reiteration.
FXS Representative Number: Enter the representative number for Line 1 and Line 2. If the gateway is
configured to register with SIP proxy server, Line 1 and Line 2 are using this number to call through SIP
proxy server.
Note: Please ensure if your VoIP Service Provider allows one account for multi-port using.
Register: Check the box to register with SIP proxy server if ticked.
Invite with ID / Account: Check the box to call through SIP proxy server without registration. It is always
ticked when Register is also ticked. Most VoIP Service Providers will interdict the connection without
registration.
Password: Enter password and re-enter to confirm.
FXS Group: Select group hunting priority for each line from the drop-down menu. It is to assign an
unassigned call according to the Hunting Priority by the gateway when there is an incoming call. A setting of
"0" zero is to disable the hunting function.
D-Link Systems, Inc.
SETUP
21