Ip Configuration Settings-Setting Ip Configuration Of Wan Port - D-Link DVG-5004S User Manual

IP Configuration Settings—Setting IP Configuration of WAN Port
Static IP Settings
NOTE: Complete static IP settings should include a static IP (Option 1 under114), IP address (111),
Subnet Mask (112), and Default Gateway (113). Please contact your local Internet Service Provider
(ISP) if you have any questions.
Function
Select a Static IP
IP address Settings
Subnet Mask Settings
Default Gateway Settings
Save Settings and Restart
Dynamic IP (DHCP) Settings
After entering IVR mode, dial 114.
After hearing "Enter value", dial 2 (to select DHCP).
Saving settings –press 509 (Save Settings). After hearing "one", dial 118 to restart the system. After
the system is restarted, press 101 to check if the IP address is retained.
If the system does not repeat the IP address, it indicates Gateway has not been properly
connected to the Internet. Please check the cable connection.
Command
After entering IVR mode, dial 114.
After hearing "Enter value", dial 1 (to select static IP)
After entering IVR mode, dial 111. After hearing "Enter value", enter your IP
address, followed by "#".
Example: If the IP address is 192.168.1.200, dial 192*168*1*200#.
After entering IVR mode, dial 112. After hearing "Enter value", enter your
subnet mask, followed by "#".
Example: If the mask value is 255.255.255.0, dial 255*255*255*0#.
After entering IVR mode, dial 113. After hearing "Enter value", enter your
default gateway's IP address, followed by "#".
Example: If the Default Gateway is 192.168.1.254, dial 192*168*1*254#.
To save settings, dial 509 (Save Settings). After hearing "one", dial 118 to
restart the system. Wait for about 40 seconds for the system to restart, and
then enter 101 to check if the IP address is retained. If the IP address is not
repeated, it indicates that Gateway has not been properly connected,
please check if the cable connection, account, or password are correct.
13