Technical Specifications - Graco WB100 Instructions-Parts List Manual

Technical Specifications

Specifications
Technical Technical Specifications
Electrostatic Air Air Spray Spray Waterborne
Electrostatic Electrostatic Air Spray
Maximum Working Fluid Pressure
Maximum Working Air Pressure
Minimum Air Pressure at Gun Inlet
Gun Air Consumption
Required turbine air flow
Range of total air flow under
normal spraying conditions
Maximum Fluid Operating
Temperature
Short Circuit Current Output
Voltage Output Energy
Sound Power (measured per ISO
Standard 9216)
Sound Pressure (measured 1 m
from gun)
Air Inlet Fitting
Fluid Inlet Fitting
Isolation Enclosure Air Inlet Fitting
Isolation Enclosure Fluid Inlet
Fitting
Wetted Parts
3A2496H
Waterborne Guns Guns
Waterborne Guns
at 40 psi: 90.4 dB(A)
at 100 psi: 105.4 dB(A)
at 40 psi: 87.0 dB(A)
at 100 psi: 99.0 dB(A)
3/8 in. OD tube fitting
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal,
Nylon, Polyethylene, Tungsten Wire
Waterborne Fluid Hose: PTFE
Suction Tube: Polyethylene, Stainless Steel
Triton Pump: See manual 309303.
U.S.
U.S. U.S.
100 psi
100 psi
45 psi
6 scfm
15–20 scfm
120°F
125 microamperes
0.35 J with fluid hose 24M733 installed.
L60T17 and L60T18: 60 kV
L60M17, L60M18, and L60M19: 30–60 kV
1/4 npsm(m) left-hand thread
Custom inlet for Graco waterborne fluid hose.
1/4 npt
Technical Specifications
Metric
Metric Metric
0.7 MPa, 7.0 bar
0.7 MPa, 7.0 bar
0.32 MPa, 3.2 bar
170 l/min
425–565 l/min
48°C
at 0.28 MPa, 2.8 bar: 90.4 dB(A)
at 0.7 MPa, 7.0 bar: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 87.0 dB(A)
at 0.7 MPa, 7.0 bar: 99.0 dB(A)
10 mm OD tube fitting
111