Clean The Paper Pick-Up Rollers For Paper Tray #2 And Tray #3 - Brother HL-J6000DW Online User's Manual

Home > Routine Maintenance
Tray #2 and Tray #3

Clean the Paper Pick-up Rollers for Paper Tray #2 and Tray #3

These instructions describe how to clean the paper pick-up rollers for Tray #2.
(HL-J6100DW) The steps for Tray #3 are very similar.
1. Unplug the machine from the electrical socket.
2. If the paper support flap is open, close it, and then close the paper support.
3. Pull tray #2 (1) completely out of the machine as shown by the arrow.
4. Clean the paper pick-up rollers for tray #2 (1) with a soft lint-free cloth moistened with water. Slowly turn the
rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to
remove all moisture.
5. Slowly push tray #2 completely into the machine.
6. Reconnect the power cord.
Related Information
• Clean Your Brother Machine
> Clean Your Brother Machine
1
1
> Clean the Paper Pick-up Rollers for Paper
306