Brother HL-J6000DW Online User's Manual page 338

Home > Machine Settings
Sleep Mode Countdown
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep
Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job.
Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
• The timer will restart if any operation is carried out on the machine, such as receiving a print job.
• The factory setting is five minutes.
• When the machine goes into Sleep Mode, the LCD backlight turns off.
1. Press [Settings] > [All Settings] > [General Setup] > [Sleep Mode].
2. Press a or b to display the [1Min], [2Mins], [3Mins], [5Mins], [10Mins], [30Mins], or [60Mins]
option, and then press the option you want.
3. Press .
Related Information
• General Settings
Related Topics:
• Set the Machine to Power Off Automatically
> Change Machine Settings from the Control Panel > General Settings > Set
333